FIT AND FINISH
We work with clients to select custom colors, finishes and textures as extraordinary and unique as they are. With the ability to seamlessly
integrate a vast range of hardware and locking systems into custom applications, our clients can realize their vision and build their legacy.
PAINT
We use a paint system that is a multi-part urethane which is applied in a controlled environment and heat-cured for consistent results.
The zinc layer provides the perfect surface for the primer to be applied and the paint is actually absorbed into the surface of the zinc for a great “bite” that will not peel.
The surface produced by the final color coat is resistant to most solvents, and can be applied in the field if touch-ups are needed. (A small paint kit is supplied with every order).
Our paint has excellent UV and fade resistance and is easy to clean. Since it is an ultra-low VOC system, our paint is very environmentally friendly.
CARBON BLACK
EURO BRONZE
PHANTOM GRAY METALLIC
SPRING GRAY
ZINC METALIZATION
We start with a base frame that is crafted from steel.
After fabrication, the steel surfaces are sandblasted and then immediately thermal sprayed or “Zinc Metalized” to protect the steel from corrosion.
Zinc metalizing is similar to hot-dipped galvanizing (both are zinc coatings) however zinc metalizing provides a thicker zinc layer that is more pure, more corrosion resistant and can be alloyed with aluminum for special conditions like coastal locations.
Since zinc metalizing is done by actually melting zinc and applying the molten metal directly to the steel with a special spray gun, the zinc surface produced is a bit rough and suitable for painting (unlike hot dipping). The process does not produce off-gas or require noxious chemicals, and is environmentally safe.
The zinc will oxidize more quickly and the zinc oxides seal the surface immediately so that oxygen cannot reach the steel substrate. These zinc oxides are non-soluble and do not wash off.
The unique properties of this protection can even “heal” minor scratches in the zinc layer and continue to protect the steel substrate.
CASEMENT HINGE OPTIONS
Our windows are equipped with standard barrel hinges, however 4-Bar Hinges create a much different effect from traditional barrel or swing hinges. As the casement or awning is opened, these hinges move the sash away from the jamb creating a space for air to circulate on both sides of the sash. In certain conditions, this can improve air flow where a traditional swing hinge can block breezes from the hinge side.
4-Bar Hinges control the opening to 60 degrees and keep the sash from opening too wide under wind forces. This is especially helpful when a wide casement is specified.
CASEMENT AND DOOR HARDWARE
You'll find the quality, peace of mind, and beauty you expect in every lever and lock. True to our tradition of quality and craftsmanship, each lever and lock is meticulously crafted of the finest materials and with the utmost attention to detail.
CURVED LEVER
SQUARED LEVER
CURVED LEVER
SQUARED LEVER
CASEMENTS HARDWARE
Need copy here. Is there any documentation that I can pull from and possibly improve? Need copy here. Is there any documentation that I can pull from and possibly improve? Need copy here. Is there any documentation that I can pull from and possibly improve?Need copy here. Is there any documentation that I can pull from and possibly improve?
Need copy here. Is there any documentation that I can pull from and possibly improve?Need copy here. Is there any documentation that I can pull from and possibly improve? Need copy here. Is there any documentation that I can pull from and possibly improve?Need copy here. Is there any documentation that I can pull from and possibly improve?
We're Here to Serve
Please let us know how we can
help you and your project succeed.